REQUEST A QUOTE
Pianos are essentially the Holy Grail for moving companies when it comes to some of the most difficult pieces they can be faced with. They can weigh in excess of 1000 pounds, and potentially be worth tens of thousands of dollars. Fortunately, 2 College Brothers has a designated Tampa piano moving team, that has moved countless pianos over the years. We also have one million dollars in insurance, enough to cover just about any piano!
There are many different sizes and styles of pianos, ranging from concert grand pianos, to smaller upright spinet pianos. Each type has a specific method, and requires different equipment, skill level, and varying amounts of man power.
- Piano Board
- Arm straps
- Allen wrench
- Plastic baggies
- Moving pads or blankets
- Stretch wrap
- Floor dolly
- 3 experienced movers
- Truck with a lift gate or wench (Optional but preferred)
- Buckle straps
- Nylon tie downs
Use the screwdriver or Allen wrench to undo the hinges on the piano topper. You will want to prepare a spread out blanket off to the side. Remove the topper from the piano, and set it on the blanket. Wrap this up in the blanket using tape and stretch wrap. Set this out of the way. Do the same with the music rack and keyboard cover. If the keyboard cover does not come off, wedge wound up stretch wrap, or cardboard on the ends to hold it in place and keep it from flapping open. Place any screws, washers, or bolts into a labeled plastic baggie.
This is where some skill and experience comes into play for a piano mover. If you were to be facing the keys, you will want to focus the front left leg. You will also be using the piano board for this segment. Place the piano board about three feet to the left of the piano. One mover should hold the front left corner of the piano, and another the back left. The third mover must un screw the front left leg, while the other two movers hold their end up. Once the leg is off, the third mover should set it on a moving pad, as he hustles around to the front right side. In a controlled movement, the front left mover lowers his end onto the piano board, while the other two moves lift their ends up, keeping as much tension off the remaining legs as possible. Once the front left end is resting safely on the board, the first mover can help to finish turning the piano onto its side, so that it rests safely on the piano board. From here, the remaining legs are to be taken off, and protected.
Step 5: Relocating the piano to the truck
Once the Piano is safely resting on its side on the piano board, be sure to wrap it completely in moving pads, tape, and stretch wrap. Then, buckle the protected piano to the piano board with the buckle straps. With two movers lifting, and one stabilizing, use arm straps to lift the piano onto a flat dolly. The piano may not be rolled to the entryway, with one mover in front, one mover in back, and one mover stabilizing. To get the piano over any thresholds or bumps, utilize this same lifting technique. Please note that any stairs or large steps will require at least 1 more additional mover, preferably 2. DO NOT attempt to move even a baby grand piano up stairs without the adequate manpower.
Step 6: Transporting the piano in the moving truck
Once you safely get the piano to the moving truck, use the lift gate or winch to lift the piano up into the truck. Additional manpower may be required to roll it up a ramp. Secure the piano to on of the walls of the truck using buckle straps, or heavy duty nylon rope. There is no need to remove the piano from the flat dolly as long as it is secured properly in the truck, however do put the wheel locks on the flat dolly. Once the truck reaches its destination, unfasten the piano and slowly lower the piano off the truck using the lift gate wench, or with additional manpower, the ramp.
We have answered some FAQ’s about residential moving?here.